L2910 2 Post Car Lift 9,000 LB Capacity Auto Truck Hoist 220V

XINKONG 9,000 LB L2910 2 Post Car Lift Auto Truck Lift

Features

• Adjustable Pads: Comes with adjustable pads and truck adapters included.
• Safety Mechanisms:
  • Double-point safety lock release.
  • Automatic arm lock restraints.
  • Relief valve built into the power pump to prevent overloading.
• Protection Features:
  • Door guards with protective rubber.
  • Up-limit switch to protect cylinder stroke within safe limits.
• Durable Components:
  • Heavy-duty 5/16″ diameter cable and 4.56″ pulley reduce stress during synchronization, increasing cable life.
  • Stiffened base plate with a 15/32″ thickness.
  • Ultra-high molecular self-lubricating nylon slider ensures smooth carriage movement.
• Included Hardware:
  • Anchor bolts and mounting hardware included.

Control System

• Lifting operation by pressing the “UP” button on the motor.
• Manual lowering operation using a lever.
• Built-in relief valve to prevent overloading.

Specifications

• Lifting Capacity: 9,000 lbs.
• Overall Height: 145 21/32″.
• Overall Width: 133-1/4″.
• Column Width: 10.59″.
• Distance Between Posts: 106-5/16″.
• Base Width: 14-9/16″.
• Column Steel Thickness: 11/64″.
• Carriage Steel Thickness: 3/16″.
• Arm Steel Thickness: 15/64″.
• Arm Length: Front and rear arms adjustable from 29.9″ to 47.2″.
• Minimum Pad Height: 3-7/8″.
• Maximum Lift Height: 74-13/16″.
• Drive-Thru Width Clearance: 99-7/32″.
• Time to Full Rise: 55 seconds.
• Shipping Weight: 1,370 lbs.

Site Selection and Installation Guidelines

Lift Location

• Ensure adequate space using architect’s plans or layout dimensions.
• Requires a 220v or 110v, 30-amp, single-phase, grounded electrical source.
• Ensure enough space for safe operation without restrictions.

Overhead Area

• Ensure the area is free from obstructions such as heaters, supports, electrical lines, doors, and lights.

Floor Requirements

• A level floor is recommended for proper installation and lifting.
• Small floor slopes can be adjusted with proper shimming.
• Do not install on:
  • Asphalt or any surface other than concrete.
  • Expansion seams or cracked/defective concrete.
  • Elevated floors without consulting an architect.
• For outdoor installations, protect the power unit from inclement weather.

Concrete Specifications

• All models require 3,000 PSI reinforced concrete.
  • 8,500 lbs – 10,000 lbs lifts: Minimum 4″ thickness.
  • 11,000 lbs – 15,000 lbs lifts: Minimum 6″ thickness.

Shipping Information

• Shipping Area: USA (48 states only). Free delivery to commercial addresses.
  • Additional Charges: $100 extra for residential or farmland delivery.
  • Exclusions: No shipping to Alaska, Hawaii, Guam, Virgin Islands, Puerto Rico, PO Boxes, or APO/FPO addresses.
• Unloading Requirements:
  • Forklift or tractor required for unloading.
  • Terminal pickup available if unloading equipment is not available.